The Standard Ez-Anneal system was designed for annealing 223/5.56, through 300 WinMag, 375 H&H Mag, 375 Weatherby Mag, etc. It will accommodate most cases with a base diameter less than .550" diameter. Cartridge height settings for 223, 308, 270, 30-06 are provided in the silkscreen for easy alignment. Anneal time settings are also completely adjustable by the operator in milliseconds (ms). In this way the user may fine tune both height and anneal times for their exacting requirements. An Optional Case Feeder may be added for Automatic Feeding of 223 or 308.
The Ez-Anneal XL system was designed for annealing larger rounds such as the 408 Cheytac, 338 Lapua Magnum, etc. It will accommodate most cases with a base diameter less than .650" diameter. Cartridge height settings are completely adjustable so the neck may be situated near the center of the annealing coil. Anneal time settings are also completely adjustable by the operator in milliseconds (ms). In this way the user may fine tune both height and anneal times for their exacting requirements. Please note that the Ez-Anneal XL is Not Suitable for annealing 223/5.56 due to the large size of the Pyrex Drop Tube.
Our Custom Fabricated Steel Case Feeder is suitable for use on Ez-Anneal, and Ez-Anneal XL. (Please note that the XL model only accepts LR Plates)
Six Feed Plates are available at this time.
LR Feed Pate #1: Accepts .308 Win, 6.5 Creedmore, 6x47 Lapua, .22-243, .243 Win, .260 Rem, 7mm-08 Rem, .338 Federal, .358 Win.
LR Feed Pate #2: Accepts .30-06, .25-06, .270 Win, .280 Rem, .35 Whelen, 7mm Rem Mag, 284 Norma.
LR Feed Plate #3: Accepts 6mmBR, 6mm Dasher, 30BR
SR Feed Plate #1: Accepts 223/5.56, 6.5 PCC, 7.62x40 WT.
SR Feed Plate #2: Accepts 300AAC Blackout
LP Feed Plate: Accepts 45 ACP, 357 Mag, 38 Sp.
Feeder with One Plate: $249.95 (Specify Feed Plate when ordering)
Additional Feed Plates: $49.95